XBT-360 4-Cylinder OBD Autogas Gas ECU | CNG LPG Conversion ECU Control System
We supply XBT-360 4-Cylinder OBD Autogas Gas ECU, our mature mass-produced electronic controller for automotive CNG and LPG dual-fuel gas conversion. This XBT-360 gas ECU is independently developed and manufactured in our factory with 17 years of autogas equipment production experience. Built for 4-cylinder gasoline engine retrofit projects, this OBD gas ECU features reliable closed-loop control, stable fuel-gas switching and strong environmental adaptability, perfectly working for auto gas modification workshops in Russia, CIS countries and the Middle East. It is a cost-effective, high-stability core control unit widely used for passenger cars and light commercial vehicle CNG/LPG conversion.
Product Introduction
The XBT-360 OBD Autogas Gas ECU is our standard mass-production engine control unit dedicated to 4-cylinder gasoline vehicle CNG and LPG dual-fuel gas conversion.Designed with mature OBD closed-loop diagnostic technology, this gas ECU can read original vehicle engine data in real time, automatically adjust gas injection parameters and avoid common conversion issues such as engine shaking, unstable idle speed, power drop and false OBD fault codes.
Optimized for harsh working environments, the XBT-360 ECU performs reliably under high temperature, low temperature and vibration conditions, which fits the climate and road conditions of Russia, Central Asia and Middle East markets. Adopting automotive-grade chips and industrial circuit protection design, this gas controller delivers long service life and strong anti-interference ability for daily vehicle operation.
Our XBT-360 autogas ECU supports simple calibration and flexible parameter tuning. It is widely adopted by gas conversion repair shops for sedan, SUV and light van dual fuel retrofit. We support bulk wholesale, OEM branding and batch program calibration for fleet renovation projects.
Core Product Advantages
As our hot-selling XBT-360 4-cylinder autogas OBD gas ECU, the core strengths are listed below:
OBD Closed-Loop Control & Diagnosis
Built-in OBD closed-loop function, real-time monitor engine operating data, read & clear fault codes, dynamically adjust gas supply to eliminate false fault alarms after gas conversion.
4-Cylinder Gasoline Engine Dedicated Design
Exclusively optimized for most 4-cylinder gasoline engines. Pre-calibrated gas injection timing and petrol-gas switching logic, ensure smooth idle and stable power output.
Strong Adaptability for Harsh Climate
Stable performance in high-temperature (Middle East) and cold low-temperature (Russia & CIS) environments, good vibration resistance for engine compartment installation.
Automotive-Grade Hardware & High Stability
Automotive core control chip, reinforced metal housing as shown in the picture, anti-aging circuit board, strong anti-electromagnetic interference for long-time continuous operation.
Easy Calibration & Installation
User-friendly software for parameter tuning, simple for gas modification technicians to set up and debug. Perfect for auto retrofit workshops.
Factory Wholesale & OEM Service
17-year manufacturer supply, support bulk order, OEM logo printing and customized program calibration for fleet projects.
Product feature and application
Core Product Features
XBT-360 autogas gas ECU is a mature mass-production controller for 4-cylinder CNG / LPG dual fuel conversion. The OBD closed-loop system continuously collects original engine signals and optimizes gas injection volume automatically, solving typical retrofit problems: idle jitter, unstable acceleration and excessive gas consumption.
With cast aluminum shell (as product image shows), this ECU can resist vibration and high temperature under the engine hood. The internal circuit comes with multiple protection mechanisms against overvoltage, short circuit and electromagnetic interference.
The control software supports flexible parameter adjustment. Technicians can tune switching sensitivity, gas supply curve and idle parameters to match different car models. It can be used independently or matched with our CNG/LPG reducer, gas rail and full conversion kits as a complete autogas modification system.
Main Application Scenarios
XBT-360 gas ECU applies to 4-cylinder gasoline passenger cars, sedans, SUVs and light commercial vehicles for CNG or LPG dual-fuel conversion.It is widely used in auto gas retrofit workshops, vehicle fleet renovation projects, aftermarket gas modification business in Russia, CIS, Middle East countries.Can be sold separately or bundled together with our full CNG / LPG conversion kits, pressure reducers and gas injection rails.
Product Details
The XBT-360 gas ECU adopts rugged die-cast aluminum housing, which provides excellent heat dissipation and vibration resistance for engine bay installation. The shell is marked with model XBT-360 and our XBT brand logo.
Equipped with automotive-grade main chip and multi-layer protection circuit, this 4-cylinder OBD gas ECU communicates smoothly with the original vehicle OBD port. Closed-loop algorithm automatically optimizes gas supply parameters, ensuring seamless switch between gasoline and gas fuel without obvious power loss.
We have optimized this ECU to adapt to cold weather in Russia & CIS and hot climate in Middle East. The whole unit passes aging test, high-low temperature test and vibration test before delivery. It can match with our full set of autogas accessories including pressure reducer, gas rail, gas injector, switch and pressure sensor.
Product Qualification & Strength Verification
We are a professional Chinese manufacturer with 17 years experience in R&D and mass production of CNG & LPG autogas conversion equipment. Our product portfolio includes gas ECU, pressure reducer, gas rail and complete conversion kits. Our products have been exported to Russia, CIS and Middle East markets for years.
All XBT-360 gas ECUs are produced and tested in our factory workshop. Every unit undergoes strict function testing and aging inspection before shipment. We provide OEM service and bulk supply for overseas importers, distributors and modification workshop wholesalers.
Shipping, Delivery & After-sales Service
Stable Delivery Capacity
Our factory owns complete production line and professional technical team. We support small trial orders and large bulk wholesale orders for XBT-360 gas ECU, together with other autogas spare parts. Stable production schedule guarantees reliable lead time for overseas buyers.
Diversified Shipping Methods
We can ship goods by express, air freight or sea freight based on your order quantity. Suitable for samples and bulk container shipments to Russia, Middle East and CIS regions. Goods will be well packed to avoid damage during transit.
Professional After-sales Support
We provide remote technical support for installation, software calibration and troubleshooting. We supply operation software and user manuals for technicians. Our engineering team offers online guidance during ECU setup, helping your workshop complete vehicle gas conversion smoothly.
FAQ
Q1: What engine does XBT-360 gas ECU support?
A: It is designed for most 4-cylinder gasoline engines for CNG or LPG dual fuel conversion, widely used for sedans, SUV and light vans.
Q2: Does XBT-360 support OBD closed-loop function?
A: Yes. Built-in OBD closed-loop diagnosis. It can read vehicle OBD data, avoid false fault codes and automatically optimize gas supply.
Q3: Can I buy this ECU separately or buy together with full conversion kit?
A: Both available. You can purchase XBT-360 gas ECU individually, or buy it matched with our pressure reducer, gas rail and other accessories as a full CNG/LPG conversion kit.
Q4: Is this ECU suitable for Russia / Middle East market?
A: Yes. We have optimized this ECU to adapt to cold climate in Russia and high-temperature working conditions in the Middle East. Many of our distributors sell this model in those regions.
Q5: Can you offer OEM service for XBT-360 ECU?
A: Yes. We support OEM logo printing and batch program calibration for large fleet orders.
Hot Tags: xbt-360 4-cylinder obd autogas gas ecu | cng lpg conversion ecu control system, China xbt-360 4-cylinder obd autogas gas ecu | cng lpg conversion ecu control system manufacturers, suppliers, factory, 4 Cylinder Universal Gas ECU Control System, Crankshaft Sensor Gas Ignition Advance Computer, Custom 4 Cylinder OBD Gas ECU Control System, engine control unit, GDI In Cylinder Direct Injection Gas ECU Control System, Single Dual Injection Gas ECU Control System
